Home Products Download Support Forum Contact Us
Make payments with PayPal - it's fast, free and secure! View PayPal Shopping Cart
   GPS Utilities Updated!
   SmartWallet Updated!
 
   Mobile Express Free!
   GPS Utilities
   GPRS Traffic Monitor
   SmartWallet
   SmartBlock
   AlarmU
   Backup
   Keyboard
   Outliner
   SMS Counter
   CeleDial
   CeleTask
   Orchid Shortcut
   Pair Love
 
   GPS Utilities
 
Efficasoft GPS Utilities is also available for:
   
[Introduction] [Screenshots] [Resources] [Devices] [History]


If your device is not listed below, please read the
general setup instructions.


Motorola Q9c & Q9h (built-in GPS receiver)
Samsung BlackJack II (built-in GPS receiver)

Method 1. GID (recommended)

Launch GPS Utilities, open "Menu/GPS Setup".

  1. Select "GID"
  2. Press OK

Start GPS from "Menu/Start GPS".

Method 2. COM/GPD

----- WM5 -----

Install Microsoft GPSID Configuration Utility (or enter 'http://www.efficasoft.com/download/GPSID_Settings.cab' in your device web browser), then

    1. Open 'Start/GPSID Settings'.
    2. Set the 'Program Port' to COM3~5 or GPD1~9, 'Hardware Port' to NONE.
    3. Set the 'Baud Rate' to 9600 and tick 'Manage Automatically'.

Launch GPS Utilities

    1. Open 'Menu/GPS Setup'.
    2. Select 'COM/GPD' and set the above Program Port & Baud Rate information.
    3. Press "Done" and you are ready to 'Start GPS'.

----- WM6/WM6.1 -----

Download "GPSID Settings" and copy Settings.exe to your phone. Launch File Manager, locate Settings.exe and execute it. Then in the opened setting window

    1. Set the 'Program Port' to COM3~5 or GPD1~9, 'Hardware Port' to NONE.
    2. Set the 'Baud Rate' to 9600 and tick 'Manage Automatically'.

Launch GPS Utilities

    1. Open 'Menu/GPS Setup'.
    2. Select 'COM/GPD' and set the above Program Port & Baud Rate information.
    3. Press "Done" and you are ready to 'Start GPS'.

Motorola Q

    1. Follow the steps in the Motorola Q User Guide, section "Turning Bluetooth On/Off/Discoverable" to turn on the Bluetooth and pair up the GPS receiver with your phone.
    2. Launch GPS Utilities.
    3. Open "Menu/GPS Setup".
    4. Select "COM/GPD".
    5. Set COM1 and Baud rate (check the rate in your GPS receiver user manual).
    6. Press Done.
    7. Start GPS from "Menu/Start GPS".
    8. Select the paired GPS receiver from prompted "Select a bluetooth device" dialog and the connection is established.

 

 

Home | Products | Support | Forum | Contact Us  
 
Copyright © 2005-2012 Efficasoft Co., Ltd. All Rights Reserved.